Identification of multiple binding sites for the THAP domain of the Galileo transposase in the long terminal inverted-repeats

Galileo is a DNA transposon responsible for the generation of several chromosomal inversions in Drosophila. In contrast to other members of the P-element superfamily, it has unusually long terminal inverted-repeats (TIRs) that resemble those of Foldback elements. To investigate the function of the long TIRs we derived consensus and ancestral sequences for the Galileo transposase in three species of Drosophilids. Following gene synthesis, we expressed and purified their constituent THAP domains and tested their binding activity towards the respective Galileo TIRs. DNase I footprinting located the most proximal DNA binding site about 70 bp from the transposon end. Using this sequence we identified further binding sites in the tandem repeats that are found within the long TIRs. This suggests that the synaptic complex between Galileo ends may be a complicated structure containing higher-order multimers of the transposase. We also attempted to reconstitute Galileo transposition in Drosophila embryos but no events were detected. Thus, although the limited numbers of Galileo copies in each genome were sufficient to provide functional consensus sequences for the THAP domains, they do not specify a fully active transposase. Since the THAP recognition sequence is short, and will occur many times in a large genome, it seems likely that the multiple binding sites within the long, internally repetitive, TIRs of Galileo and other Foldback-like elements may provide the transposase with its binding specificity.     

Analysis of genetic variability and relationships among Mentha L. using the limonene synthase gene, LS

The genus Mentha comprises a group of aromatic plants with worldwide distribution. Because of frequent interspecific hybridization, the genetic relationships within the genus are not clearly understood. Limonene synthase, which catalyses the first committed step in the essential oil monoterpene biosynthetic pathway, is considered to be a possible rate limiting enzyme. With the homology-based cloning method, primers were designed according to cDNA sequence to amplify full-length DNA sequences in 13 Mentha samples from five species, using Perilla as an outgroup. Analyses of gene structure, length variation, GC-content, Ts/Tv ratio and evolutionary diversity were carried out. Consensus phylogenetic trees were obtained using maximum likelihood, neighbor-joining, and maximum parsimony, respectively, based on the full-length genomic DNA sequences, complete ORF coding sequences and predicted amino acid sequences. The results presented here based on the sequence of MhLS provide the first credibly supported genetic relationships for Mentha, which enables a basis for further mint taxonomy, cultivation and breeding.     

Characterisation of a thermo-alkali-stable lipase from oil-contaminated soil using a metagenomic approach

Lipases are widely used for a variety of biotechnological applications. Screening these industrial enzymes directly from environmental microorganisms is a more efficient and practical approach than conventional cultivation-dependent methods. Combined with activity-based functional screening, six clones with lipase activity were detected and a gene (termed lipZ01) isolated from a target clone with the highest lipase activity was cloned from an oil-contaminated soil-derived metagenomic library and then sequenced. Gene lipZ01 was expressed in Pichia pastoris GS115 and the molecular weight of the recombinant lipase LipZ01 was estimated by electrophoresis analysis to be approximately 50 kDa. The maximum activity of the purified lipase was 42 U/mL, and the optimum reaction temperature and pH value were 45 °C and 8.0, respectively. The enzyme was highly stable in the temperature range 35–60 °C and under alkaline conditions (pH 7–10). The presence of Ca²⁺ and Mn²⁺ ions could significantly enhance the activity of the lipase. The purified lipase preferentially hydrolysed triacylglycerols with acyl chain lengths ≥8 carbon atoms, and the conversion degree of biodiesel production was nearly 92% in a transesterification reaction using olive oil and methanol. Some attractive properties suggested that the recombinant lipase may be valuable in industrial applications.     

Habitat associations and communities of breeding birds in the highlands of south-west Jordan

Abstract

Habitat associations and communities of breeding birds were studied for the first time in a semi-arid region in the southern highlands of Jordan. Birds were censused and habitat variables estimated in different habitat types, ranging from steppe to open, Mediterranean-type woodland. The variation of abundance of several species was explained adequately with multiple regressions of up to five habitat variables. A distinct bird community was identified by using principal component analysis on the highland plateau (e.g. Short-toed Lark, Isabelline Wheatear), in steppe habitats modified by dry farming methods. The plateau was identified as a transition zone of Palaeoxeric/Turkestanian and Mediterranean faunal types. The remainding cluster included species of diverse origins (Palaearctic, Mediterranean, Saharo-Sindian, Afrotropical and others). It was subdivided into three bird assemblages with preferences for following habitat types: Mediterranean-type open woodlands (e.g. Syrian Serin), dwarf shrub formations of higher altitudes (e.g. Spectacled Warbler), dwarf shrub formations, including clearings and the edge of woodlands at lower altitudes (e.g. Scrub Warbler).     

Assessment of Mechanobiological Models for the Numerical Simulation of Tissue Differentiation around Immediately Loaded Implants

Nowadays, there is a growing consensus on the impact of mechanical loading on bone biology. A bone chamber provides a mechanically isolated in vivo environment in which the influence of different parameters on the tissue response around loaded implants can be investigated. This also provides data to assess the feasibility of different mechanobiological models that mathematically describe the mechanoregulation of tissue differentiation. Before comparing numerical results to animal experimental results, it is necessary to investigate the influence of the different model parameters on the outcome of the simulations. A 2D finite element model of the tissue inside the bone chamber was created. The differentiation models developed by Prendergast, et al. [“Biophysical stimuli on cells during tissue differentiation at implant interfaces”, Journal of Biomechanics, 30(6), (1997), 539–548], Huiskes et al. [“A biomechanical regulatory model for periprosthetic fibrous-tissue differentiation”, Journal of Material Science: Materials in Medicine, 8 (1997) 785–788] and by Claes and Heigele [“Magnitudes of local stress and strain along bony surfaces predict the course and type of fracture healing”, Journal of Biomechanics, 32(3), (1999) 255–266] were implemented and integrated in the finite element code. The fluid component in the first model has an important effect on the predicted differentiation patterns. It has a direct effect on the predicted degree of maturation of bone and a substantial indirect effect on the simulated deformations and hence the predicted phenotypes of the tissue in the chamber. Finally, the presence of fluid also causes time-dependent behavior.

Both models lead to qualitative and quantitative differences in predicted differentiation patterns. Because of the different nature of the tissue phenotypes used to describe the differentiation processes, it is however hard to compare both models in terms of their validity.     

Laminar shear stress elicit distinct endothelial cell e‐selectin expression pattern via TNFα and IL‐1β activation

The ability to discriminate cell adhesion molecule expression between healthy and inflamed endothelium is critical for therapeutic intervention in many diseases. This study explores the effect of laminar flow on TNFα‐induced E‐selectin surface expression levels in human umbilical vein endothelial cells (HUVECs) relative to IL‐1β‐induced expression via flow chamber assays. HUVECs grown in static culture were either directly (naïve) activated with cytokine in the presence of laminar shear or pre‐exposed to 12 h of laminar shear (shear‐conditioned) prior to simultaneous shear and cytokine activation. Naïve cells activated with cytokine in static served as control. Depending on the cell shear history, fluid shear is found to differently affect TNFα‐induced relative to IL‐1β‐induced HUVEC expression of E‐selectin. Specifically, E‐selectin surface expression by naïve HUVECs is enhanced in the 8–12 h activation time range with simultaneous exposure to shear and TNFα (shear‐TNFα) relative to TNFα static control whereas enhanced E‐selectin expression is observed in the 4–24 h range for shear‐IL‐1β treatment relative to IL‐1β static control. While exposure of HUVECs to shear preconditioning mutes shear‐TNFα‐induced E‐selectin expression, it enhances or down‐regulates shear‐IL‐1β‐induced expression dependent on the activation period. Under dual‐cytokine‐shear conditions, IL‐1β signaling dominates. Overall, a better understanding of E‐selectin expression pattern by human ECs relative to the combined interaction of cytokines, shear profile and history can help elucidate many disease pathologies. Biotechnol. Bioeng. 2013; 110: 999–1003. © 2012 Wiley Periodicals, Inc.     

Towards a metabolic engineering strain “commons”: An Escherichia coli platform strain for ethanol production

In the genome‐engineering era, it is increasingly important that researchers have access to a common set of platform strains that can serve as debugged production chassis and the basis for applying new metabolic engineering strategies for modeling and characterizing flux, engineering complex traits, and optimizing overall performance. Here, we describe such a platform strain of E. coli engineered for ethanol production. Starting with a fully characterized host strain (BW25113), we site‐specifically integrated the genes required for homoethanol production under the control of a strong inducible promoter into the genome and deleted the genes encoding four enzymes from competing pathways. This strain is capable of producing >30 g/L of ethanol in minimal media with <2 g/L produced of any fermentative byproduct. Using this platform strain, we tested previously identified ethanol tolerance genes and found that while tolerance was improved under certain conditions, any effect on ethanol production or tolerance was lost when grown under production conditions. Thus, our findings reinforce the need for a metabolic engineering “commons” that could provide a set of platform strains for use in more sophisticated genome‐engineering strategies. Towards this end, we have made this production strain available to the scientific community. Biotechnol. Bioeng. 2013; 110: 1520–1526. © 2013 Wiley Periodicals, Inc.     

Nuclear-encoded chloroplast RNA polymerase sigma factor SIG2 activates chloroplast-encoded phycobilisome genes in a red alga, Cyanidioschyzon merolae

The phycobilisome (PBS) is a photosynthetic light-harvesting complex in red algae, whose structural genes are separately encoded by both the nuclear and chloroplast genomes. While the expression of PBS genes in both genomes is responsive to environmental changes to modulate light-harvesting efficiency, little is known about how gene expression of the two genomes is coordinated. In this study, we focused on the four nuclear-encoded chloroplast sigma factors to understand aspects of this coordination, and found that SIG2 directs the expression of chloroplast PBS genes in the red alga Cyanidioschyzon merolae.